Related Documents

Product Indication

Clavicle fractures

Clavicle osteotomies

Indicated in cases where the clavicular growth plates have fused, or

When the plate system will not cross the growth plates.

Product Features

VALP - 2.7 Clavicle Plating System
All holes fit 2.7mm screws, enabling a single drill size for the system.
A dedicated suture/k-wire hole aids fixation, plate alignment, and lateral border visualization.
The bending notch facilitates convenient plate shaping when contouring is required.
Anatomically contoured plate matches clavicle curvature for a low profile, better bone fit.
2.7 Clavicle Lateral Plate
Clavicle Plate with 2.7 Locking Screw
Combi holes combine a variable angle locking interface with a compression zone, allowing insertion of variable angle locking screws for angular stability or cortex screws for axial compression.
Optimized screw hole angulation improves grip & reduces screw pull-out risk.
Refined, low-profile plate with contoured edges to minimize soft tissue irritation.
Plates come in small, medium, and large sizes to suit patient height.
2.7 Clavicle Plate VALP

Photo Gallery

VALP - 2.7 Clavicle Lateral Plate Small
VALP - 2.7 Clavicle Lateral Plate Medium
VALP - 2.7 Clavicle Lateral Plate Long
VALP - 2.7 Clavicle Shaft Plate Small
VALP - 2.7 Clavicle Shaft Plate Medium
VALP - 2.7 Clavicle Shaft Plate Long
2.7 mm Variable Angle Locking Screw , Self-tapping
2.7 mm Cortex Screw , Self-tapping